Description
This Boro tank-compatible kit includes both a standard and DIY RBA pod. And, this all-in-one setup also features 80 watts of power from a 1000mAh battery, a USB-C charging port, customizable buttons and plates, 21700/20700/18650 battery support, a high number of coil options, a multitude of safety protections, a plethora of modes including temperature, voltage, variable wattage, and bypass. Powered by an updated Vandy Vape chipset, the Pulse AIO is capable of reaching 80 watts of power in several modes: bypass, variable wattage, temperature control, and voltage. Power is generated by either a 21700, 20700, or 18650 battery, with included adapter. A Type-C charging system on the side provides a fast, speedy charging process. The chipboard also allows for a safe vape experience. Not only will the device warn you when the battery is low, but it will also prevent open circuit, over-current, over-puff, short circuit, and high-temperature issues. which means you may feel safe whenever using this all-in-one setup. In the design department, the Vandy Vape Pulse AIO kit is made of PC or ABS nylon, making it much lighter than any of the preceding devices such as the Pulse V2. So, really the heaviest part of this setup would be the battery. Six colors are available: frosted blue, frosted red, frosted black, frosted green, frosted white, and black. Perhaps the best aspect of this kit is that you can exchange the plates and even the fire button. The tools to do so are included with the purchase, but the accessories to swap out the button or panel will be released later on. Pre-Built & DIY Pod Included The Pulse AIO includes both a pre-built 3.7ml pod, as well as an RBA pod that can hold 3.7ml of vape juice. Inside the standard pod, there’s an interchangeable coil pre-installed, but as of this writing, it is unsure which coil head it is. Fortunately, the setup works with any VVC coils of which you may see the parameters in the infographic below. Installing the coil is also effortless thanks to a push/pull design and refills are a breeze thanks to an integrated side-fill port. The kit also works with any Boro-compatible tank. To ensure all Boro tanks have a tight fit, you may adjust the height of the positive table to the required height. A closer inspection of the RBA tank also indicates that airflow is curved, making it suitable for both small and large coil builds. You may adjust the air intake by rotating the ring underneath the deck. Parameters: Brand: Vandy Vape Product PULSE AIO Kit Size: 55.6*97.5*28.2mm Operating Voltage: 3.2-4.2V Charging Input Voltage: 5+0.25V RBA Pod Capacity: 3.7ml Pre-Built Pod Capacity: 5ml Power range: 5-80W Maxim Output Current: 32A Resistance: 0.05-3.002 Charging Current: 1000mAh Package Contents: 1x PULSE AIO Device 1x PULSE AIO DIY Pod 1x PULSE AIO Pod 1x Wrench 2 x VVC COIL 2 x 24ga Ni80 Coil 0.4ohm 1x Bag Of Accessories 1x Coil lead guide 1x QC TYPE-C USB Cable 1x Instruction Manual 1x 18650 Battery Adaptor 1x G.W: 302.89 Order Tips: ● Battery using notice: Make sure to charge in or on a fire-proof surface. Don’t leave charging batteries unattended. Please have fundamental knowledge about the batteries you are using and how to make use of them correctly. Guarantee: Please review our guarantee policy. Payment: We currently accept Visa and MasterCard as payment methods. If you experience any difficulties checking out immediately after payment, please wait a few minutes and try again. In the event that you need to cancel an order, please be patient and contact sales for a refund. You can then place a new order and complete the payment process. When placing your order, please specify your preferred colors, correct address, city, state/province, telephone number, and any other necessary information in the order remarks, or send us a message at sales. Warranty: If you encounter any issues with your order, please contact us before opening a dispute. We will send you a free replacement after confirming the problem. For a full refund, please return the item(s) to us in its original packaging and provide us with the shipping tracking number. Once we receive the package, we will issue a full refund. Shipping from China: Epacket: Delivery takes 15-25 days in the EU and USA, and 20-35 days in Russia. Netherlands Post: Delivery takes about 20 days in the EU, 25-35 days in Asia, and approximately 60 days in South America or Africa. Feedback: We specialize in electronic cigarettes and e-hookah products, and our main goal is 100% customer satisfaction. Therefore, your feedback is crucial to us. If you are satisfied with your purchase, please leave us a 5-star review. If you have any concerns, please contact us before leaving a review so we can address the issue in a timely manner.
