Description
VOOPOO Drag S2 60W Pod System
The Drag S2 is the internal-battery half of the Drag S2 and X2 pair. Same Gene.TT board, same 5ml PnP X pod, but a 2500mAh cell built in, so there is nothing to buy or swap. Output tops out at 60W. Fire button, TFT screen, and a zinc alloy shell that has some weight to it.
Highlights 5-60W adjustable, resistance range 0.1ohm to 3.0ohm
2500mAh internal battery, USB Type-C charging
5ml PnP X side-fill pod with an 810 drip tip
SMART mode reads coil resistance and sets the wattage
Zinc alloy body, magnetic pod connection, PCTG pod tank
Ships with a 0.2ohm and a 0.3ohm PnP-X coil Drag S2 Specs SpecDetail Wattage
5-60W, adjustable Battery
2500mAh internal, non-removable Charging
USB Type-C Voltage
3.2-4.2V Resistance range
0.1ohm to 3.0ohm Pod capacity
5ml PnP X, side fill Chipset
Gene.TT Display
TFT colour screen Operation
Fire button Body
Zinc alloy, magnetic pod connection, PCTG pod Drip tip
810 Coils and Pods That Fit PartWhat you getNotes PnP-X coils
0.15ohm to 1.0ohm, seven builds
Press-fit into the pod, no threading PnP-X cartridge pods
Empty DTL or MTL pod, 5ml
Takes any PnP-X coil, coils sold separately PnP-X Tank
Empty tank, 5ml, 510 threaded
MTL or DTL version, for 510 mods Which Resistance to Start With CoilWattageBest For 0.15ohm mesh
50-60W (device max)
Direct lung, freebase 0.2ohm mesh
40-60W
Direct lung, freebase 0.3ohm mesh
32-40W
Direct lung to restricted direct lung 0.45ohm
25-32W
Restricted direct lung 0.6ohm
18-23W
Tighter draw, salt or freebase 0.8ohm
12-16W
Mouth to lung, nic salt 1.0ohm MTL
10-13W
Tightest draw, nic salt The 0.15ohm coil is rated to 80W on paper. The Drag S2 caps at 60W, so it runs at the bottom of that coil’s range here. If you want the full 80W on the same coils, that is the Drag X2 or Drag X3. In the Box Drag S2 device
PnP X DTL cartridge, 5ml
1x 0.2ohm PnP-X coil
1x 0.3ohm PnP-X coil
Type-C cable
User manual Why Shop VOOPOO at Central Vapors
We stock every PnP-X resistance from the 0.15ohm mesh through the 1.0ohm MTL build, plus spare PnP-X cartridge pods and the PnP-X Tank, so a replacement is a reorder instead of a hunt. Central Vapors has been filling vape orders since 2013, and every order is backed by our satisfaction guarantee.
Common Questions Q Does the Drag S2 need a separate battery?
No. The 2500mAh cell is built in and charges over Type-C. The Drag X2 is the external-battery version of the same device if you would rather swap cells. Q Which coils fit?
The PnP-X range, 0.15ohm through 1.0ohm MTL. They press-fit into the pod. Older PnP coils do not fit the PnP-X pod. Q Can I use it for nic salt?
Yes. Put in a 0.8ohm or 1.0ohm MTL coil and run it around 10-16W. The coils in the box are sub-ohm and suited to freebase e-liquid at higher wattage. Q How do I refill the pod?
It fills from the side. Pull the pod off the magnets, open the silicone plug, fill, and drop it back on. Q What is SMART mode doing?
Reading the resistance of whichever coil you installed and setting a wattage that suits it. You can override it and set the wattage yourself. Q Is 60W enough for direct lung?
Yes, comfortably. The 0.2ohm and 0.3ohm coils both sit inside 60W, and those are the two builds most people run for direct lung on this device. For use by adults 21+.
