Description
VOOPOO Drag X2 80W Pod System
The Drag X2 takes a single 18650 and gives you 80W with it, which is a lot of output for something this narrow. Gene.TT 2.0 board, three modes, and the 5ml PnP X pod. Buy the cell separately and you can carry a spare instead of a charger.
Highlights 5-80W adjustable, resistance range 0.1ohm to 3.0ohm
Runs on one external 18650 battery (sold separately)
5ml PnP X DTL pod, magnetic connection
Three modes: SMART, RBA and ECO
129.8 x 31.8 x 28.6mm, USB Type-C charging
Ships with a 0.15ohm and a 0.3ohm PnP-X coil Drag X2 Specs SpecDetail Wattage
5-80W, adjustable Battery
1 x 18650, external, not included Charging
USB Type-C Resistance range
0.1ohm to 3.0ohm Pod capacity
5ml PnP X Modes
SMART, RBA, ECO Chipset
Gene.TT 2.0 Airflow
Fixed Size
129.8 x 31.8 x 28.6mm E-liquid
Freebase or nic salt, depending on the coil Coils and Pods That Fit PartWhat you getNotes PnP-X coils
0.15ohm to 1.0ohm, seven builds
Press-fit into the pod, no threading PnP-X cartridge pods
Empty DTL or MTL pod, 5ml
Takes any PnP-X coil, coils sold separately PnP-X Tank
Empty tank, 5ml, 510 threaded
MTL or DTL version, for 510 mods Which Resistance to Start With CoilWattageBest For 0.15ohm mesh
60-80W
Direct lung, freebase 0.2ohm mesh
40-60W
Direct lung, freebase 0.3ohm mesh
32-40W
Direct lung to restricted direct lung 0.45ohm
25-32W
Restricted direct lung 0.6ohm
18-23W
Tighter draw, salt or freebase 0.8ohm
12-16W
Mouth to lung, nic salt 1.0ohm MTL
10-13W
Tightest draw, nic salt In the Box Drag X2 device
PnP-X DTL pod, 5ml
1x 0.15ohm PnP-X mesh coil
1x 0.3ohm PnP-X mesh coil
Type-C cable
Battery not included Why Shop VOOPOO at Central Vapors
We stock every PnP-X resistance from the 0.15ohm mesh through the 1.0ohm MTL build, plus spare PnP-X cartridge pods and the PnP-X Tank, so a replacement is a reorder instead of a hunt. Central Vapors has been filling vape orders since 2013, and every order is backed by our satisfaction guarantee.
Common Questions Q Is a battery included?
No. It needs one 18650, sold separately in our 18650 battery section. If you would rather not deal with cells, the Drag S2 is the same platform with a 2500mAh internal battery. Q What is the difference between the Drag X2 and the Drag X3?
The Drag X3 adds a touchscreen and accepts a 21700 as well as an 18650. Both cap at 80W and both run the same PnP-X coils. Q Which coils fit?
PnP-X, 0.15ohm through 1.0ohm MTL. Not the older PnP coils – the deck changed between the two. Q Can I use nic salt?
Yes, with a 0.8ohm or 1.0ohm MTL coil at 10-16W. The two coils in the box are sub-ohm builds for freebase at higher wattage. Q Is the airflow adjustable?
Not on the device. Airflow is fixed here, so the coil you pick sets how tight or open the draw feels. Q How long does a charge last?
That depends on the 18650 you run and the wattage you sit at. ECO mode trims power to stretch the cell, and a spare 18650 is the fastest way back to full. For use by adults 21+.
